Hanslope Automated Gate

In Aluminium Gates by jameskelly

We were commissioned by our client to supply & install a Hanslope Automated Gate. Our highly skilled team installed the gates to a small complex of approximately 5 homes in Collingtree, Northampton.

Skilled fabricators constructed the Hanslope Automated Gate. The fabricators constructed the gates to the same exacting standard that we strive to achieve with our installations. The aluminium gates are carefully examined before being sent to the powder coaters.

Customers can specify any colour from our swatch cards. In this instance the customers asked for the Hanslope Automated Gate to match detail around each of the premises.

Our highly skilled engineers installed Beninca underground gate automation equipment to the Hanslope Automated Gate. The Project Manager will specify the most suitable motor for the gates by taking the gates size and weight into consideration along with the potential number of operations.

Clients can specify multiple access control devices. In this instance the customers asked for a  multi-button GSM intercom system. The Project Manager specified a Videx intercom system. Beninca UK supplied the intercom system. Our installation team ensured the intercom system was fitted with the utmost care and attention before the unit is then programmed. Our customers can freely open the gates via a vehicle induction loop.

The automatic aluminium gate installation consisted of Beninca DU350NVE motors, front safety photocells, rear safety induction loop and pressure sensitive resistive edges as specified by the DHF. Our fully trained operatives installed the equipment to the highest standards.

The Hanslope Automated Gate and associated devices are tested thoroughly before being handed over to the client. A senior gate installer will produce a handover document which is then emailed to our client for their records.

Our after sales team will contact the client 12 months after the installation date to carry out a full annual service.